Showing posts with label metal collage. Show all posts
Showing posts with label metal collage. Show all posts

Friday, August 19, 2011

Printed Metal Collage

Last week on August 12th at the end of my post I included a picture of a printed metal piece that was just starting.  Here is the piece finished.  It consists of several layers and I will start at the bottom and work up in the description.

When all the layers are together the bottom is hardware cloth as you saw in the original picture on the 12th.  On the way up in the layers is metal screen and then a cut out of the printed metal.  The surface is a digital print that originated with a  detail of one of my pieces.  From there I attached the metal to the hardware cloth and metal screen using beads and wire.  The beads between the surfaces start to give the raised 3D look I want.  From there a piece of crocheted brass wire is added to the pieces of wire from the tops of all the beads.  For the top layer I wrapped silver wire around another cutout of the metal.  This cut out was then added to the very top of the configuration.  Picture and detail follows.



Friday, June 3, 2011

Working with Printed Metals

One of my new favorite things is using prints of printers plates, metal mesh and the usual beverage cans and mixing it up with other elements.  I have also been toying with metal mesh printed and then assembled into squares.  I'll show you the cube thing later, but for now here are a couple of the mesh pieces I have been doing for studies.

 This first pic is the study for one of my 2 ft x 4 ft book pages. Created with printed beverage cans-the base is a beverage can in a bark pattern, the next layer is a different can print attached to the top of the base can. I put the cans together with a crochet strip of a paper wrapped metal that I get from a bead store here in Prescott.  This makes the connection pliable and bendable.  Each square has hemp that connects it to the crochet.  I will be printing cans in the next few days to make a similar piece for my forest book page.
 This piece is created in a random manner.  It contains beverage can pieces and metal mesh pieces woven through a piece of black hardware cloth with copper wire.  Yes it is time consuming but pretty much most of what I do it.  Case in point is the piece below.
This has 3 layers- bottom in aluminum hardware cloth in its original silver state.  Over that is a piece of aluminum window screen attached to the hardware cloth with beads and stainless wire.  The top is cut out from a digital print on a printers plate.  The cut out has been wrapped with the same stainless wire that connected the beads.  This is a detail of the piece.